HydroStor® Chamber
High-performance stormwater chambers
Product Type: Chamber

Prinsco high-performance HydroStor® stormwater chambers are designed for site-specific applications such as parking lots, roadways, and commercial developments. With four sizes available, creating the ideal stormwater management system for your unique needs is easy when you choose HydroStor.
HydroStor chambers provide an environmentally sustainable underground water management system that optimizes groundwater recharge and saves valuable land resources. Our storm chamber models are designed to fit almost any type of performance specifications, project footprint, and construction budget.
Prinsco’s storm chamber systems can be easily modeled with the HydroCAD Stormwater Modeling System and the Civil 3D Auto CAD Module. Both tools simplify the process of designing a system meeting specific storage and footprint requirements.
Contact your Prinsco sales rep to learn more about HydroStor® Chamber.
Related
Performance
- High-performance polypropylene material
- Meets or exceeds ASTM F2418 product standard and ASTM F2787 design standard
- Meets AASHTO H20 live load and HL93 design load requirements
- Advanced injection molding technology for maximum structural performance
System Design
- Maximum land utilization and minimal environmental impact
- Smaller footprint with lower installed cost than similar chambers
- Features integral connectors for simplified assembly
- Design tool available at Prinsco.com/HydroStor-Resources
- Available as part of a complete solution with end caps, pipe manifolds, and pretreatment options
Handling
- Integrated handles for safe on-site handling
- Sturdy and lightweight for safe transport and placement by two people
- Specially designed pallet for trouble free handling
- Maximum stacking density to reduce on-site staging footprint
Available Sizes
HS290 |
HS180 |
HS75 |
HS31 |
|
---|---|---|---|---|
Installed Storage Capacity* | 164.5 ft3/chamber | 176 ft3/chamber | 75 ft3/chamber | 29.6 ft3/chamber |
Height | 59.5″ | 45.5″ | 29.7″ | 16″ |
Width | 100.5″ | 77.8″ | 51″ | 34″ |
Unit Length | 51.8″ | 88.7″ | 87.1″ | 87.3″ |
Installed Length | 48.3″ | 85.3″ | 84.9″ | 85.5″ |
Weight | 122 lbs | 122 lbs | 69 lbs | 34 lbs |
Chambers/Pallet | 10 | 19 | 33 | 90 |
Material | Polypropylene | Polypropylene | Polypropylene | Polypropylene |
Mfg. Process | Injection Molding | Injection Molding | Injection Molding | Injection Molding |
Special Features | Integrated Handles | Integrated Handles | Integrated Handles | Integrated Connectors |
ASTM Standards | Meets or Exceeds | Meets or Exceeds | Meets or Exceeds | Meets or Exceeds |
* Assuming 40% void volume of backfill with 9″ bedding & 12″ cover for HS290 & HS180 and 6″ bedding & 6″ cover for HS75 & HS31
Installation Specifications
HS290 |
HS180 |
HS75 |
HS31 |
|
---|---|---|---|---|
Backfill Above Chamber | 12″ min. | 12″ min. | 6″ min. | 6″ min. |
Bedding | 9″ min. | 9″ min. | 6″ min. | 6″ min. |
Chamber Spacing | 8.5” | 5″ | 6″ | 3″ |
Backfill at Edge of System | 12″ | 12″ | 12″ | 12″ |
Minimum Cover | 24” | 18″ | 18″ | 16″ |
Maximum burial Depth | 8′ | 8′ | 8′ | 8′ |
- Meets or exceeds ASTM F2418 product standard
- Meets or exceeds ASTM F2787 design standard
- Meets AASHTO H20 live load requirement
- Meets AASHTO HL93 design load requirement